Table of Contents
Advertisement
The users assigned to each security level have the following access options:
1. user – user class with read-only permissions
2. config – power user class with read and write permissions
3. admin – administrator user class with read and write permissions and
permission to configure user information
Command Groups
There are eight groups of CLI commands as shown by pressing the TAB key at the
TP100 prompt. Typing a question mark ("?") after the eight command groups display
provides a description of each command group as show in the following example of
TimeProvider 100 inputs and responses.
Input:
tp100> <tab>
Response:
cli-settings ping set switchfirmware
logout reboot show upgrade
Input:
tp100> ?
Response:
set
show
ping
reboot
upgrade
switchfirmware
logout
cli-settings
tp100>
098-00106-000 Revision A – March, 2009
-
Configure TP100 settings
-
Display TP100 information or settings
-
Determine whether a host is up and display ping statistics
-
Reboot this TP100
-
Download firmware to TP100
-
Switch between two firmware images
-
Log out from the current session
-
Configure CLI setting
Chapter 5 CLI Commands
Command Groups
TimeProvider 100 User's Guide
57
Advertisement
Table of Contents
