Installation - Symmetricom TimeProvider 100 User Manual

Chapter 2 Installation and Configuration
In This Chapter

Installation


Configuration Setup

Installation and Configuration Checklist

This section provides preliminary installation and configuration procedures for the
TimeProvider 100. Use the
verify that you have completed the required installation and configuration before
using the TimeProvider 100.
Before you begin to install the TimeProvider 100, review all the information in this
section. If difficulties are encountered during the installation process, contact
Symmetricom Global Services (SGS). Refer to the
on page 91 for contact information. SGS provides you with technical product
expertise and support, and Customer Service provides support about orders,
Return Material Authorization (RMA)s, and other customer service-related
information.
Installation
This section describes guidelines for surveying a site before installing, unpacking
the unit, rack mounting, and grounding the shelf.
Site Survey
Before you begin installation, determine the shelf location, ensure the appropriate
power source is available (-48/-60 nominal VDC), and ensure that the equipment
rack is properly grounded. Refer to
41 for more information about ordering kits for rack mounting of the TimeProvider
100.
The TimeProvider 100 is designed to mount in a 19-inch (48 cm) rack, occupies
1.66 in (40.64 mm, 1 RU) of vertical rack space, and has a depth of 8.0 in (203.2
mm).
Environmental Requirements
Please refer to the
Specifications and Factory
098-00106-000 Revision A – March, 2009
Installation and Configuration
Note: 21-inch and 23-inch rack mounting adapters are available as
separately ordered items.
Maintenance and
Defaults, on page 97 for more information.
Contacting Technical
Part Numbers and Return
Troubleshooting, on page 87 and
Checklist, on page 39 to
Support,
Information, on page
TimeProvider 100 User's Guide 25