Chapter 1 Overview
This chapter provides introductory information for the TimeProvider 100.
In This Chapter
Overview
Functional Description
Overview
TimeProvider 100 shown in
(GPS)-disciplined timing and frequency source stand-alone, one Rack Unit (RU)
device. The system receives GPS satellite signals to control an onboard oscillator
and to provide 10MHz and 1 PPS output signals and four channels of E1. With
superior clock holdover performance and its compact size, the TimeProvider 100
enables rapid deployment for remote offices, street cabinets, and wireless base
stations. It is designed to provide precise time and synchronization for locations
where cost and space are a limitation.
TimeProvider 100 features a configurable output signal to support a variety of
framer signals. This provides the flexibility to integrate into specific application
environments easily. This device is fully manageable by local and remote
management using RS232 and its Ethernet port.
Figure 1-1.
With password-protected management capability, users and administrators can
easily and securely configure and monitor the performance of the device using CLI,
Simple Network Management Protocol (SNMP), and Telnet. TimeProvider 100
supports remote configuration of system settings, automating saving and
restoration, and installation of new software when needed.
098-00106-000 Revision A – March, 2009
Figure 1-1
TimeProvider 100
is a low-cost Global Positioning System
TimeProvider 100 User's Guide
17