Table of Contents
Advertisement
ping
This command sends one ping to an IP address and waits for up to 5 seconds.
Input:
tp100> ping 192.169.1.10
Response:
Host is alive
tp100>
Response:
Host is not reachable
tp100>
switchfirmware
This command is used to switch between two firmware images in the FLASH
memory.
Input:
tp100> switchfirmware
Response:
Firmware switched to the other image. Reboot to activate selected firmware.
tp100>
logout
This command is used by a user to log out from their session.
Input:
tp100> logout
Response:
Symmetricom TP100
login:
098-00106-000 Revision A – March, 2009
Chapter 5 CLI Commands
Command Groups
TimeProvider 100 User's Guide
59
Advertisement
Table of Contents
