Safety And Compliance Information; General Safety Guidelines And Warnings - Juniper QFX5100 Hardware Manual

CHAPTER 21

Safety and Compliance Information

General Safety Guidelines and Warnings

General Safety Guidelines and Warnings
Copyright © 2017, Juniper Networks, Inc.
General Safety Guidelines and Warnings on page 187
Fire Safety Requirements on page 191
Installation and Maintenance Safety Information on page 192
Radiation and Laser Warnings on page 200
Maintenance and Operational Safety Warnings on page 203
Power and Electrical Safety Information on page 209
General Safety Guidelines and Warnings on page 187
Definitions of Safety Warning Levels on page 188
Qualified Personnel Warning on page 190
Warning Statement for Norway and Sweden on page 191
The following guidelines help ensure your safety and protect the device from damage.
The list of guidelines might not address all potentially hazardous situations in your working
environment, so be alert and exercise good judgment at all times.
Perform only the procedures explicitly described in the hardware documentation for
this device. Make sure that only authorized service personnel perform other system
services.
Keep the area around the device clear and free from dust before, during, and after
installation.
Keep tools away from areas where people could trip over them while walking.
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could
become caught in the device.
Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
187