Port Panel Of A Qfx5100-96S Device; Figure 14: Qfx5100-96S Switch Port Panel - Juniper QFX5100 Hardware Manual

Related
Documentation

Port Panel of a QFX5100-96S Device

Copyright © 2017, Juniper Networks, Inc.
devices. See Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for the
QFX Series.
Access port pinouts for the QFX5100-48T switch are the same as the management port
connector pinouts for the QFX Series. For more information, see Management Port
Connector Pinouts for the QFX Series.
Access Port and Uplink Port LEDs on a QFX5100 Device on page 29
Field-Replaceable Units in a QFX5100 Device on page 28
Port Panel of a QFX5100-24Q Device on page 16
Port Panel of a QFX5100-48S Device on page 21
Port Panel of a QFX5100-96S Device on page 25
Installing and Removing QFX5100 Device Hardware Components on page 137
Connecting QFX Series Switches in a Virtual Chassis
Connecting a QFX5100 Device in a Virtual Chassis Fabric on page 127
Management Port Connector Pinouts for the QFX Series
The port panel of the QFX5100-96S switch consists of 96 small form-factor pluggable
plus (SFP+) and 8 quad small-form factor pluggable plus (QSFP+) ports that are normally
configured as access ports. Physical ports(
transceivers and 1 Gbps transceivers. The eight 40-Gigabit ports (
QSFP+ transceivers and are normally configured as uplinks or Virtual Chassis ports
(VCPs). Although the 104 physical ports of the QFX5100-96S would map to 128 logical
ports using channelization, only 104 logical ports are supported.
Figure 14 on page 25 shows the port panel of a QFX5100-96S switch.

Figure 14: QFX5100-96S Switch Port Panel

1— Electrostatic Discharge (ESD) terminal
2—10 Gigabit Ethernet ports (96)
Chapter 2: Chassis Components and Descriptions
through ) support 10 Gbps SFP+
0 95
through
96
3— 40 Gigabit Ethernet ports (8)
) support
104
25