Qfx-Pfa-4Q; Figure 23: Qfx-Pfa-4Q Faceplate And Leds; Table 14: Qfx-Pfa-4Q Status And Fpga Leds - Juniper QFX5100 Hardware Manual

QFX5100 Switch Hardware Guide

QFX-PFA-4Q

Table 14: QFX-PFA-4Q Status and FPGA LEDs

LED State
ST Unlit
Green
FPGA
Off
LD
Amber
Green
AL Off
Amber
Red
42
The QFX-PFA-4Q, which features a high-performance field-programmable gate array
(FPGA), provides four additional QSFP+ ports to the QFX5100-24Q switch. The
QFX-PFA-4Q is a double-wide expansion module.
and LEDs on the expansion module.

Figure 23: QFX-PFA-4Q Faceplate and LEDs

1— Expansion module status LED
2— QSFP+ ports and LEDs
3— FPGA LEDs
Table 14 on page 42 describes the status and FPGA LEDs on the QFX-PFA-4Q.
Description
The expansion module is offline.
The chassis is powered off.
The expansion module is online and functioning normally.
FPGA not configured.
FPGA configuration in progress or failed.
FPGA configured successfully.
No FPGA alarms.
Minor FPGA alarm.
Major FPGA alarm.
Figure 23 on page 42
4— 1-PPS and 10-MHz GPS input and output
5— RJ-45 Ethernet port
6— Time-of-day (TOD) RS-232 port
Copyright © 2017, Juniper Networks, Inc.
shows the ports