Disconnecting A Fiber-Optic Cable From A Device; Maintaining Fiber-Optic Cables - Juniper QFX5100 Hardware Manual

Disconnecting a Fiber-Optic Cable from a Device

Related
Documentation

Maintaining Fiber-Optic Cables

Copyright © 2017, Juniper Networks, Inc.
Juniper Networks devices have field-replaceable unit (FRU) optical transceivers to which
you can connect fiber-optic cables.
Before you begin disconnecting a fiber-optic cable from an optical transceiver, ensure
that you have taken the necessary precautions for safe handling of lasers. See Laser and
LED Safety Guidelines and Warnings.
Ensure that you have the following parts and tools available:
A rubber safety cap to cover the transceiver
A rubber safety cap to cover the fiber-optic cable connector
To disconnect a fiber-optic cable from an optical transceiver installed in the device:
Disable the port in which the transceiver is installed by issuing the following command:
1.
[edit interfaces]
user@device# set interface-name disable
WARNING: Do not look directly into a fiber-optic transceiver or into the
ends of fiber-optic cables. Fiber-optic transceivers and fiber-optic cables
connected to transceivers emit laser light that can damage your eyes.
Carefully unplug the fiber-optic cable connector from the transceiver.
2.
Cover the transceiver with a rubber safety cap.
3.
WARNING: Do not leave a fiber-optic transceiver uncovered except when
inserting or removing a cable. The rubber safety cap keeps the port clean
and prevents accidental exposure to laser light.
Cover the fiber-optic cable connector with the rubber safety cap.
4.
Connecting a Fiber-Optic Cable on page 154
Removing a Transceiver on page 151
Maintaining Fiber-Optic Cables on page 155
Fiber-optic cables connect to optical transceivers that are installed in Juniper Networks
devices.
To maintain fiber-optic cables:
Chapter 16: Replacing Transceivers and Fiber-Optic Cable
155