Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Using both hands, place the power supply in the power supply slot on the FRU panel
3.
of the switch and slide it in until it is fully seated and the locking lever slides into place.
Figure 76: Installing a Power Supply in a 1 U QFX5100 Device
Figure 77: Installing a Power Supply in a QFX5100-96S Device
NOTE:
Each power supply must be connected to a dedicated power source
outlet.
NOTE:
If you have a Juniper Care service contract, register any addition,
change, or upgrade of hardware components at
https://www.juniper.net/customers/support/tools/updateinstallbase/
to do so can result in significant delays if you need replacement parts. This
note does not apply if you replace existing components with the same type
of component.
AC Power Supply for a QFX5100 Device on page 53
Field-Replaceable Units in a QFX5100 Device on page 28
Port Panel of a QFX5100-48S Device on page 21
Management Panel of a QFX5100 Device on page 32
AC Power Cord Specifications for a QFX Series Device on page 74
Connecting AC Power to a QFX5100 Device on page 111
Connecting DC Power to a QFX5100 Device on page 114
Removing a Power Supply from a QFX5100 Device on page 140
Chapter 14: Replacing Power Supply
. Failure
139