Juniper QFX5100 Hardware Manual page 184

QFX5100 Switch Hardware Guide
Related
Documentation
164
Verify that the new device is inserted into the fabric using the
7.
operational mode command from the QFabric default partition
inventory node-devices
CLI.
user@qfabric> show fabric administration inventory
Item
Node group
NW-NG-0
P5502-C
P5502-C
P8207-C
P8207-C
TA3713470056
TA3713470056
TR0214080017
TR0214080017
Interconnect device
IC-TB3713490033
TB3713490033/RE0
IC-TB3714010454
TB3714010454/RE0
Fabric manager
FM-0
Fabric control
FC-0
FC-1
Diagnostic routing engine
DRE-0
Director group
0281022011000011
0281032012000018
Connect the new Node device to each Interconnect device for data plane
8.
interconnection.
Verify the data plane interconnection using the show chassis fabric connectivity
9.
operational mode command from the QFabric default partition CLI. Repeat this
command if necessary until the new device is shown in the output.
From the QFabric director, enter the following configuration mode CLI commands to
10.
remove the previous Node device from the inventory of QFabric system components
and associate the serial number of the new device with the alias of the previous device.
root@fabric# delete fabric aliases node-device old-serial-numberalias-name
root@fabric# set fabric aliases node-device new-serial-numberalias-name
Add the interface configuration of the new Node device and ensure the interfaces are
11.
grouped into a link aggregation group (LAG) for the rerouting of traffic.
Commit the changes using the
12.
the old device to the new device.
Configuring Aliases for the QFabric System
Converting the Device Mode for a QFabric System Component
show chassis fabric connectivity
Identifier
commit command, which sends the configuration of
Copyright © 2017, Juniper Networks, Inc.
show fabric administration
Connection Configuration
Connected Configured
Disconnected
Disconnected
Connected Configured
Connected
Disconnected
Disconnected
Disconnected
Disconnected
Connected Configured
Connected
Connected Configured
Connected
Connected Configured
Connected Configured
Connected Configured
Connected Configured
Connected
Connected