Call Progress Tone Plan; Figure 2-34 Call Progress Tone Configuration Interface; Table 2-28 Call Progress Tone Configuration Parameters - Tadiran Telecom TGW4 SERIES User Configuration Manual

User Configuration Manual

2.7.11 Call Progress Tone Plan

After login, click the Advanced > Tones tab to open this interface.
Call Progress Tone Configuration Interface
Figure 2-34
Call Progress Tone Configuration Parameters
Table 2-28
Note: * indicates mandatory parameters for Aeonix US ALARMS.
Name
*
Country/Region
Dial tone
Second dial tone
Stutter dial tone
Busy tone
Congestion tone
Ring back tone
Off-hook warning
tone
64
Description
There are progress tone plans for several countries and regions which are
pre-programmed in gateways. Users may also specify the tone plan according to the
national standard. Gateways provide tone plans for the following countries and
regions:
Israel, the United States, Singapore, Malaysia, Indonesia, United Arab Emirates, Australia,
Zimbabwe, France, Italy, Germany, Mexico, Chile, Russia, Japan, South Korea, Hong Kong,
China, Taiwan, India, Sudan, Iran, Algeria, Pakistan, Philippines, Kazakhstan, User Defined.
User-defined: define the call progress tones by yourself.
From the Country/Region drop-down list, select the system location.
For Aeonix US ALARMS  Select United States.
Prompt tone of off-hook dial tone.
Used for the second stage dial tone.
Used for prompt of voice mail, or when the subscriber line is set with "Do Not
Disturb Service and Call Transfer".
Used for busy line prompt.
Used for notification of call set up failure due to resource limit.
The tone sent to caller when ringing is on.
Used for reminding the subscriber of off-hook and no dialup status of the phone.
TGW4/8 Gateway Series for Aeonix
Tadiran Telecom (TTL) L.P.