User Configuration Manual
2.5.3 Trunk Batch (TGW8-2G)
Only a gateway with FXO ports can display this interface.
After login, click the Trunk > Batch tab to open the Batch configuration interface.
Step 1
Click
Step 2
Click
Trunk Batch Configuration Interface
Figure 2-21
38
, the following interface is shown. Choose batch configured trunks and click OK.
to activate this function to configure this parameter. For details of the parameter, see Trunk > Feature.
TGW4/8 Gateway Series for Aeonix
Tadiran Telecom (TTL) L.P.