Routing; Digit Map; Figure 2-23 Configuration Interface For Digit Map; Table 2-17 Description Of Digit Map - Tadiran Telecom TGW4 SERIES User Configuration Manual

User Configuration Manual

2.6 Routing

2.6.1 Digit Map

After login, click the Routing > Digit Map tab to open the dialing rules interface.
Configuration Interface for Digit map
Figure 2-23
Dialing rules are used to effectively determine if the received number sequence is completed for
terminating receiving numbers and sending received numbers. The proper use of dialing rules can help to
reduce the connection time of telephone calls.
The maximum number of rules that can be stored in gateways is 250. Each rule can hold up to 32
numbers and 38 characters. The total length of dialing rules table (the total length of all dialing rules) can
be up to 2280 bytes.
The default digit map only contains system function rules. If you want to set your own digit map, select
the country in the Advanced > Tones tab and input the rules you want in the text box. The following
provides descriptions of typical rules:
Description of Digit Map
Table 2-17
Digit map
x
.
##
42
Description
Represents one digit between 0-9.
Represents more than one digit between 0-9.
After ## is detected, the gateway terminates the process of receiving digits.
## is a special dial string for users to receive gateway IP address and version number
of firmware by default.
TGW4/8 Gateway Series for Aeonix
Tadiran Telecom (TTL) L.P.