Network Configuration; Figure 2-9 Network Configuration Interface; Table 2-3 Network Configuration Parameters - Tadiran Telecom TGW4 SERIES User Configuration Manual

TGW4/8 Gateway Series for Aeonix

2.3.2 Network Configuration

After login, click the Basic > Network tab to open the network configuration interface.
Network Configuration Interface
Figure 2-9
Network Configuration Parameters
Table 2-3
Note: * indicates mandatory parameters for Aeonix.
Name
*
Setup
Username
Password
*
IP address
Tadiran Telecom (TTL) L.P.
Description
Methods for obtaining an IP address:
Static IP: static IP address is used;

DHCP: use the dynamic host configuration protocol (DHCP) to obtain IP addresses

and other network parameters;
PPPoE: PPPoE service is used.

For Aeonix  Select Static IP
Enter an authentication user name if PPPoE service is selected, and there is no default
value.
Enter an authentication password if PPPoE service is selected, and there is no default
value.
If "Static IP" or "DHCP" is selected but an address fails to be obtained, the gateways
will use the IP address filled in here. If the gateways obtain an IP address through
DHCP, the system will display the current IP address automatically obtained from
DHCP. This parameter must be set due to no default value.
For Aeonix  In the IP address box, enter the TGW gateway IP address.
User Configuration Manual
13