Enable Snmp Authenticate_Traps; Disable Snmp Authenticate_Traps; Show Snmp Traps - D-Link DGS-1210/ME Series Reference Manual

Success.
DGS-1210-28MP/ME:5#

enable snmp authenticate_traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To turn on SNMP authentication trap support:
DGS-1210-28MP/ME:5# enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DGS-1210-28MP/ME:5#

disable snmp authenticate_traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the SNMP authentication trap support:
DGS-1210-28MP/ME:5# disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DGS-1210-28MP/ME:5#

show snmp traps

Purpose
Syntax
Description
Parameters
Restrictions
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To enable SNMP authentication traps support.
enable snmp authenticate_traps
The enable snmp authenticate_traps command enables SNMP
authentication trap support on the Switch.
None.
Only Administrator or operator-level users can issue this command.
To disable SNMP authentication traps support.
disable snmp authenticate_traps
The disable snmp authenticate_traps command disables SNMP
authentication trap support on the Switch.
None.
Only Administrator or operator-level users can issue this command.
To display SNMP trap support status on the Switch.
show snmp traps
The show snmp traps command displays the SNMP trap support
status currently configured on the Switch.
None.
None.
107