Config 802.1X Auth_Mode; Create 802.1X Guest_Vlan - D-Link DGS-1100-06/ME Cli Reference Manual

Syntax
Description
Parameters
Restrictions
Example usage:
To display RADIUS settings on the Switch:
DGS-1100-06/ME:5#show radius
Command: show radius
Index Ip Address
----- ----------------
1 10.48.74.121
Total Entries : 1
Success!
DGS-1100-06/ME:5#

config 802.1x auth_mode

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure 802.1x authentication by port address:
DGS-1100-06/ME:5#config 802.1x auth_mode port_based
Command: config 802.1x auth_mode port_based
Success!
DGS-1100-06/ME:5#

create 802.1x guest_vlan

Purpose
Syntax
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
show radius
The show radius command displays the current RADIUS
configurations on the Switch.
None.
None.
Auth-Port Acct-Port Timeout Retransmit Key
---------
1812
To configure the 802.1x authentication mode on the Switch.
config 802.1x auth_mode [port_based | mac_based]
The config 802.1x auth_mode command enables either the port-
based or MAC-based 802.1x authentication feature on the Switch.
[port_based | mac_based] – Specifies whether 802.1x
authentication is by port or MAC address.
Only Administrator or operator-level users can issue this command.
Enables network access to a Guest VLAN.
create 802.1x guest vlan <vlan_name 32>
(secs)
---------- --------- --------------- ------
1813 5
182
10 dlink