Show Fdb - D-Link DGS-1210/ME Series Reference Manual

DGS-1210-28MP/ME:5# clear flood_fdb
Command: clear flood_fdb
Success.
DGS-1210-28MP/ME:5#

show fdb

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display unicast MAC address table:
DGS-1210-28MP/ME:5# show fdb port 3
Command: show fdb port 3
VID VLAN Name
---- -------------------------------- --------------------------
1 default
Total Entries : 1
DGS-1210-28MP/ME:5#
To display the aging time:
DGS-1210-28MP/ME:5# show fdb aging_time
Command: show fdb aging_time
Unicast MAC Address Aging Time = 300 (seconds)
DGS-1210-28MP/ME:5#
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To display the current unicast MAC address forwarding database.
show fdb {port <port 1-28> | [vlan <vlan_name 32> | vlanid
<vidlist>] | mac_address <macaddr> | static | aging_time}
The show fdb command displays the current contents of the
Switch's forwarding database.
<port 1-28> − The port number corresponding to the MAC
destination address. The Switch always forwards traffic to the
specified device through this port.
[vlan <vlan_name 32> | vlanid <vidlist>] − The name of the VLAN or
the vlan id on which the MAC address resides.
<macaddr> − The MAC address entry in the forwarding table.
static − Specifies that static MAC address entries are to be
displayed.
aging_time − Displays the aging time for the MAC address
forwarding database.
None.
MAC Address
00-00-01-01-02-03 3
Port Type
---------------
Permanent
188