Show Fdb - D-Link DGS-1100-06/ME Cli Reference Manual

Parameters
Restrictions
Example usage:
To display multicast MAC address table:

show fdb

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display unicast MAC address table:
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
vlan <vlan_name 32> − The name of the VLAN on which the MAC
address resides.
mac_address <macaddr> − The MAC address that will be added to
the forwarding table.
None.
DGS-1100-06/ME:5#show multicast_fdb
Command: show multicast_fdb
Static Multicast Table
----------------------
Total Mac Addresses displayed: 0
DGS-1100-06/ME:5#
To display the current unicast MAC address forwarding database.
show fdb {port <port 1-28> | vlan <vlan_name 32> |
mac_address <macaddr> | static | aging_time}
The show fdb command displays the current contents of the
Switch's forwarding database.
<port 1-28> − The port number corresponding to the MAC
destination address. The Switch always forwards traffic to the
specified device through this port.
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address entry in the forwarding table.
static − Specifies that static MAC address entries are to be
displayed.
aging_time − Displays the aging time for the MAC address
forwarding database.
None.
DGS-1100-06/ME:5#show fdb port 3
Command: show fdb port 3
VID VLAN Name
---- -------------------------------- --------------------------
1 default
Total Entries : 1
MAC Address
00-00-01-01-02-03 3
100
Port Type
---------------
Permanent