Dsl Configuration Rtu Screens - Paradyne 8540 User Manual

DSL Card Configuration

DSL Configuration RTU Screens

6-20
Use the system information sub-menu of the RTU screens to configure RTU
information.
Procedure
1. Follow this menu sequence:
Configuration
2. The RTU Information menu appears. Enter the desired value on the selected
screen and field as shown in Table 6-8 and press Return.
Table 6-8. RTU Information
RTU Information
Displays RTU information such as RTU type, system, location, and contact, model
number, serial number, version of firmware, and version of hardware.
Port # – Enter the RTU port number.
RTU Type – Model number of endpoint. For Model 8540, possible endpoints are
5170/5171/5246/5216. For Model 8546, possible endpoints are 5446r1/5446r2/5546 .
System Name – Name assigned to the card.
System Contact – Name or number of the person responsible for the card.
System Location – Physical location of the system.
Model Num – Model number of card. (This field only appears on Model 8540 and is
read only.)
Serial Num – Serial number of card. (This field only appears on Model 8540 and is read
only.)
Firmware Rev. – Version of firmware. (This field only appears on Model 8540 and is
read only.)
Hardware Rev. – Version of hardware. (This field only appears on Model 8540 and is
read only.)
November 1997
RTU Config. (A-H)
A-H-A
8000-A2-GB20-20