Paradyne 8540 User Manual page 154

Static Route Warning Messages
The following table lists warnings and error messages displayed on the Static
Routes screen.
8000-A2-GB20-20
Message . . .
Routing Table: Route not added (MCC and
DSL)
Routing Table: Route limit reached for
interface (DSL)
Routing Table: Route limit reached for
routing table (MCC and DSL)
Routing Table: Client limit reached for
interface (DSL – 8540 only)
Routing Table: Interface not active (DSL –
8540 only)
Routing Table: Next hop gateway currently
unreachable (MCC and DSL)
Routing NVRAM: Database Error (MCC
and DSL)
Routing NVRAM: Database Route Limit
Reached (MCC and DSL)
November 1997
G
Meaning . . .
Route was saved into NVRAM but not
added to the active routing table.
Route was saved into NVRAM but not
added to the active routing table because
there are already 32 routes for the
interface.
Route was saved into NVRAM but not
added to the active routing table because
the active routing table is full.
Route was saved into NVRAM but not
added to the active routing table because
the endpoint connected has reached its
client limit.
Route was saved into NVRAM but not
added to the active routing table because
the endpoint is not connected at this time.
When the interface comes up. the route
will be added.
Route was saved into NVRAM but not
added to the active routing table because
there is no way to reach the next hop
gateway. If an interface comes up that has
the next hop gateway, the route will be
added.
Route was not saved into NVRAM and not
added to the active table. This is a general
database error.
Route was not saved into NVRAM and not
added to the active table because the
NVRAM is full.
G-1