Download Code and Apply Download
Scenario Two: Download Only System
Apply Download
C-2
In order for the system to become fully functional again, you must start the
Download Code file transfer procedure. Enter the image file name and the TFTP
Service IP address and select yes to begin the file transfer. When the file transfer
has successfully completed, the system will automatically restart and become
fully functional with the newly acquired firmware.
From the MCC or DSL Configuration Main Menu, select Configuration
Status
Download Code (A-A-G) . This selection brings you to the Download
submenu. Select Apply Download.
November 1997
Card
8000-A2-GB20-20