Paradyne 8540 User Manual page 78

DSL Card Configuration
6-10
Table 6-3. Interfaces Options (3 of 3)
PPP
Gives the user the ability to configure parameters for the PPP links used for the DSL
connections. For the 8540, there is no PPP submenu.
Interface Name – s1c, s1d, s1e, or s1f.
Restart Timer – 1–10000 in seconds (Default = 3).
Max Terminates – (Default = 2).
Max Configures – Maximum number of PPP links (Default = 10).
Max Naks – Maximum number of negative acknowledgments before PPP link goes
down (Default = 10).
Negotiate Options
The following values should not be changed:
MRU: no
ACCM: no
MAGIC: no
Quality: no
PFC: no
ACFC: no
Option Values
Local MRU (max) – 64–64000 bytes (Default = 1500)
ACCM: Default = FFFFFFFF
LQR Freq: Default = 10
Link Options
Trace: on/off/raw/decode (Default = off). This field is for field service use only and
should not be turned on.
Echo Probe: yes/no (Default = no)
Option Values
Echo Freq: Default = 10
Echo Policy: Default = 5
NOTE: While most of the fields on this screen are pre-populated, the values can be
changed.
November 1997
A-C-D
8000-A2-GB20-20