Checklist for Setting Up SNMP
Features
Setting Up SNMP Features
MCC SNMP Community Strings and Authentication Failure Trap
Management System Source Validation for MCC
8000-A2-GB20-20
Use the following checklist when setting up SNMP features.
From the MCC Main Menu, select Configuration
( A-F-C).
Enter Read Only community string name(s).
Enter Read Write community string name(s).
If desired, enable the Authentication Failure Trap.
Enter the IP address of addresses of the NMS.
While optional, it is recommended, for additional security, that source validation is
enabled.
From the MCC Main Menu, select Configuration
Enable IP address security validation.
Enter the IP address of up to five NMS managers that will be permitted
access to the MCC card.
Enter access permission to be granted to each NMS system
(ReadOnly(ro)/Read/Write(rw)/NoAccess(na)).
November 1997
B
SNMP
Communities/Traps
SNMP
Security (A-F-A).
B-1