Configuring the HotWire DSLAM
Creating the Default Route
4-10
Use this procedure to create the default route to the management domain next
hop router. This default route will be used to forward management domain traffic
from the MCC card.
Procedure
To create the default route:
1. Select Configuration
2. Press Return on the Item 0 field to add a new record.
3. Enter values for the following fields and press Return after each entry:
Field
Host/Net
Subnet Mask
Next Hop
Pref (Preference)
4. Confirm the save and press Ctrl-z to return to the Configuration
menu.
November 1997
IP Router
Static_Routes (A-E-A).
Description
Destination of the route.
Associated subnet mask
for the specified
destination IP address.
IP address of the next hop
device for the specified
destination.
Measure of how preferable
one route is to another, if
you have two routes going
to the same destination.
(The lower the number, the
more preferable the route.)
This route is compared to
other routes for the same
destination address.
Input
0.0.0.0 to indicate the
default route
nnn.nnn.nnn.nnn format
nnn.nnn.nnn.nnn format
1
IP Router
8000-A2-GB20-20