Card Selection Screen - Paradyne 8540 User Manual

HotWire Menus and Screens

Card Selection Screen

2-14
From the HotWire Chassis Main Menu, select Card Selection to display the status
of any of the 18 cards present in the chassis by type and slot number. The Card
Selection screen also displays general and interface status for each card.
The following figure illustrates the positional display of the card selection screen:
<card name> T M R e d1 d2 d3 d4 w1 w2 w3 w4
On the chassis display, the following information is shown.
NOTE:
If an option is not active, an underscore is shown in its place.
Position Display
<card type>
1 T (Test mode)
2 M (Major alarm)
3 R (Minor alarm)
4 e (Ethernet)
5 d1 (DSL)#
6 d2 (DSL)#
November 1997
97-15693
Description
MCC
Card currently in test mode
Major alarm present on card
Minor alarm present on card
Status of Ethernet link (U=UP, D=Down, or
X=Disabled)
Status of DSL card Port 1 (U=UP, D=Down,
or X=Disabled, or H=Handshaking)
Status of DSL card Port 2 (U=UP, D=Down,
or X=Disabled, or H=Handshaking)
8000-A2-GB20-20