Configuring A Static Route To An Nms On Each Dsl Card - Paradyne 8540 User Manual

Configuring a Static Route to an NMS on each DSL Card

8000-A2-GB20-20
Use this procedure to enable the management traffic from the 8546 DSL cards or
5446 RTUs to be routed back through the MCC.
Procedure
To configure a static route to an NMS on each DSL card:
1. Select Configuration
2. Press Return on the Item 0 field to add a new record.
3. Enter values for the following fields and press Return after each entry:
Field
Host/Net
Subnet Mask
Next Hop
Pref (Preference)
4. Confirm the save and press Ctrl-z to return to the Configuration
menu.
November 1997
Configuring the HotWire DSLAM
IP Router Static_Routes (A-E-A) .
Description
Destination of the route to
the NMS.
Associated subnet mask
for the specified
destination IP address to
the NMS.
IP address of the next hop
device for the specified
destination to the NMS.
Measure of how preferable
one route is to another, if
you have two routes going
to the same destination.
(The lower the number, the
more preferable the route.)
This route is compared to
other routes for the same
destination address.
Input
0.0.0.0 to indicate the
default route
nnn.nnn.nnn.nnn format
nnn.nnn.nnn.nnn format
1
IP Router
4-13