Reviewing The Levels Of Access; Operator Login Screen - Paradyne 8540 User Manual

Reviewing the Levels of Access

Operator Login Screen

8000-A2-GB20-20
There are two levels of privileges on the HotWire DSLAM system. Your user
accounts can be configured with a user name, password, and privilege of:
Administrator, giving you access to all of the features of the system including
configuration options, or
Operator, giving you read-only access.
The default access is no login and password with administrator status. To provide
login security to the DSLAM, user accounts must be configured. See
Configuration Users Screens
You can log into the HotWire DSLAM system using either a local VT100-
compatible terminal or a remote Telnet connection. However, the HotWire DSLAM
system accepts only one login session at a time.
At the Operator Login screen, enter your login ID and password.
NOTE:
The login ID and password are case sensitive; that is, the system recognizes
both upper- and lower-case letters. For example, if you enter your user name
and password information in upper case letters and your assigned user name
and password are in upper- and lower-case letters, the system will not let you
log in.
After entering your login ID and password, the system displays the HotWire
Chassis Main Menu.
November 1997
HotWire Menus and Screens
in Chapter 5.
MCC
2-13