Cannot Upload Configurations To A Unix Server; Unexpected Subnet Data; Cannot Communicate With 5446 Rtu From Mcc Card - Paradyne 8540 User Manual
Dslam for 8540 and 8546 dsl cards
Hide thumbs
Also See for 8540:
- Network configuration manual (130 pages) ,
- Installation instructions manual (12 pages)
Table of Contents
Advertisement
Cannot Upload Configurations to a Unix Server
Unexpected Subnet Data
Cannot Communicate with 5446 RTU from MCC Card
8000-A2-GB20-20
PROBLEM:
TFTP server denies write permission (Message is "TFTP recv
failure").
ACTION:
1. Before uploading configurations, create a dummy file and
give it global Read-Write permissions.
2. Configure TFTP host to have Write permissions is specified
directory.
PROBLEM:
Proxy ARP not properly set for HotWire 5446 RTU.
ACTION:
1. Reconfigure DSL cards affected.
2. Set Proxy ARP only for HotWire 5446 RTU, not entire
subnet.
3. Using structured subnetting, verify proper subnetting was
utilized.
PROBLEM:
Error in setting peer address on s1b.
ACTION:
1. Set peer host address to 0., for example, where MCC's s1b
address is 198.152.180.10 and local subnet is "180", peer
address must be set to 198.152.180.0.
November 1997
Diagnostics and Troubleshooting
8-15
Advertisement
Table of Contents
Troubleshooting
