Troubleshooting - Paradyne 8540 User Manual

Troubleshooting

8000-A2-GB20-20
The status of each card in the HotWire DSLAM is indicated on the Card Selection
HotWire Menus and Screens
screen (see Chapter 2,
from the HotWire Chassis Main Menu.
The status of each DSL card is indicated by codes being displayed in any of eight
positions to the right of the card selected. For example, if you select DSL card in
Slot 4, the following may be displayed:
4: MODEL #
Pos:
This display indicates that there is a Major Alarm on the DSL card in Slot 4, and
that, while Ethernet and DSL Ports 1 and 2 are up, DSL Ports 3 and 4 are
disabled.
The following table explains the codes by position.
Position Display
<card type>
1 T (Test mode)
2 M (Major alarm)
3 R (Minor alarm)
4 e (Ethernet)
5 d1 (DSL)#
6 d2 (DSL)#
7 d3 (DSL)#
8 d4 (DSL)#
9 w1 (WAN)*#
– w2 (WAN)*#
– w3 (WAN)*#
– w4 (WAN)*#
* Not applicable for 8540 or 8546 DSLAM RADSL circuit cards of MCC cards.
# Not used for MCC cards.
November 1997
_ M R D U X X X
1 2 3 4 5 6 7 8
Description
MCC
Card currently in test mode
Major alarm present on card
Minor alarm present on card
Status of Ethernet link (U=UP, D=Down, or
X=Disabled)
Status of DSL card Port 1 (U=UP, D=Down,
or X=Disabled, or H=Handshaking)
Status of DSL card Port 2 (U=UP, D=Down,
or X=Disabled, or H=Handshaking)
Status of DSL card Port 3 (U=UP, D=Down,
or X=Disabled, or H=Handshaking)
Status of DSL card Port 4 (U=UP, D=Down,
or X=Disabled, or H=Handshaking)
Status of WAN link (U=Up, D=Down,
L=Loopback)
Status of WAN link Port 2 (U=Up, D=Down,
L=Loopback)
Status of WAN link Port 3 (U=Up, D=Down,
L=Loopback)
Status of WAN link Port 4 (U=Up, D=Down,
L=Loopback)
Diagnostics and Troubleshooting
). Choose Card Selection
8-5