Paradyne 8540 User Manual page 145

Traps
E-2
Event
Ethernet link down
Ethernet link up
xDSL margin low
xDSL margin normal
xDSL error rate high
xDSL error rate normal
xDSL port failure
xDSL port operational
Cold start
Warm start
xDSL test start
xDSL test clear
DHCP filter security failure minor
Dynamic filter injection
failure
November 1997
Trap Class Comment
major —
normal —
minor Margin estimate below customer set
threshold.
normal Margin estimate above customer set
threshold.
minor Error rate estimate above customer set
threshold.
normal Error rate estimate now below customer set
threshold.
major Processor detected bad DSL modem chip
set.
normal Processor can now communicate with DSL
modem chip set.
warning Card has been reset and performed a cold
start.
warning Power on reset.
normal Test started by any means.
normal Test over.
Filter based security could not be enabled
because the maximum number of filter rules
has been reached.
warning Cannot inject or delete dynamic filters to
RTU on port N.
8000-A2-GB20-20