Assigning Ip Addresses To The Backplane On The Mcc Card - Paradyne 8540 User Manual

Assigning IP Addresses to the Backplane on the MCC Card

8000-A2-GB20-20
Use this procedure to create a separate and distinct network or subnetwork for
the 8546 DSL cards and 5446 RTUs.
Procedure
To assign IP addresss to the backplane:
1. Select Configuration
2. Enter values for the following basic fields and press Return after each entry:
Field
IP Interface
Base IP Addr
Base Subnet Mask
Peer IP Address
Route to Peer
* Enter the network/subnetwork portion of the Base IP address, with 0 for the
host portion so that the Peer is the entire subnet.
In addition, the following fields appear on the screen. These fields can be
used to customize your application.
Field
Input Filter
Output Filter
3. Press Ctrl-z to return to the Configuration
November 1997
Configuring the HotWire DSLAM
Interfaces IP Network (A-C-B).
Description
Name of the interface.
IP address of the
management domain.
Associated subnet mask of
the base IP address.
IP address used to indicate
directly connected systems.
Routing method to use to get
to peer (i.e., host or net).
Description
Prevents packets from
entering the DSL card
through a specified interface.
Prevents packets from going
out of the DSL card through a
specified interface.
Interfaces menu.
Input
s1b (backplane)
nnn.nnn.nnn.nnn format
nnn.nnn.nnn.nnn format
nnn.nnn.nnn.nnn format *
Net
Input
Blank to disable.
Blank to disable.
4-7