Troubleshooting And Diagnostics - Paradyne 8540 User Manual

HotWire DSLAM System Description

Troubleshooting and Diagnostics

1-6
The HotWire DSLAM system provides diagnostic submenu options that:
Display selftest results for CPU, memories, and ports
Perform ping tests and display results
Show major and minor alarms
Display or clear system error logs
Enable or disable the A/B power supply alarm
Perform a trace route to an IP address to display a list of intermediate nodes
to the destination
Run a nondisruptive packet echo test over the DSL line to an RTU
NOTE:
You must have administrator permission to perform most of the
troubleshooting and diagnostic activities. However, you can run
non-disruptive tests as a user with operator permission. For more information
about troubleshooting and diagnostics, see Chapter 8,
Troubleshooting .
November 1997
Diagnostics and
8000-A2-GB20-20