Adjust The Sensor Head Using Setup Support - Siemens SIMATIC VS120 Operating Instructions Manual

8.6

Adjust the sensor head using setup support

8.6
Before you commission the "SIMATIC VS120 Vision Sensor", you must adjust the sensor
head correctly You do this with the "SIMATIC VS120 Vision Sensor" adjustment support that
is available in the Internet Explorer. The adjustment support shows you an image as seen by
the sensor head.
Note
Online Help
At the bottom right of each page of adjustment support, you will see a "Help" button with
which you can call up online help at any time. The relevant help text of the online help opens
depending on the currently open dialog.
Requirements
The Start Page of the "SIMATIC VS120 Vision Sensor" adjustment support was started over
the Internet Explorer
Procedure
1. On the start page of the adjustment support, click on "Sensor Adjustment". The
Figure 8-4
Vision Sensor SIMATIC VS120
Operating Instructions, Edition 02/2006, A5E00757507-01
"Adjustment" user interface opens. The sensor head view is displayed and updated
several times per second.
Adjustment
8.6 Adjust the sensor head using setup support
Commissioning
8-17