Working With Setup Support; Introduction - Siemens SIMATIC VS120 Operating Instructions Manual

9.3

Working with setup support

9.3
9.3.1

Introduction

Notice
Possible data loss!
The editing data is lost if the Internet Explorer or the input screens are turned off without first
saving the data because the application does not have session memory.
You should therefore always save your data to avoid losing it.
Note
Online Help
At the bottom right of each page of adjustment support, you will see a "Help" button with
which you can call up online help at any time. The relevant help text of the online help opens
depending on the currently open dialog.
Open the Start Page of the adjustment support in the Internet Explorer, refer to the section
"Commissioning using adjustment support on the PG / PC with installed Internet Explorer".
With "Adjust Sensor", you display the user interface of the SIMATIC VS120.
Note
When you open adjustment support, the dialog that opens corresponds to the current
operating state of the VS120 processing unit. The appropriate job is activated depending on
the previous operating state of the VS120 processing unit.
Vision Sensor SIMATIC VS120
Operating Instructions, Edition 02/2006, A5E00757507-01
Operation
9.3 Working with setup support
9-19