Operation; Overview; Working With The Processing Unit; Introduction - Siemens SIMATIC VS120 Operating Instructions Manual

Operation

9.1

Overview

9.1
There are two ways of operating the SIMATIC VS120:
• From the VS120 processing unit, see the section:
• Using adjustment support See the section
You can set and change all parameter settings with adjustment support on the PC.
Configuration on the VS120 processing unit itself is limited.
9.2

Working with the processing unit

9.2
9.2.1

Introduction

The display of the VS120 processing unit is used to show the coordinates and the orientation
of the test object currently being viewed and the associated quality value. You can also
navigate between the menus and make entries in the LCD display.
Example of an LCD display:
M 01 RUN N
X=−299.0
Y=0.0
↓
Five levels are implemented as selection menus or displays:
• Adjust
• Connect
• RUN
• Options
• Maintain
Vision Sensor SIMATIC VS120
Operating Instructions, Edition 02/2006, A5E00757507-01
unit
OK:Info
Working with the VS120 processing
Working with adjustment support on the PC
9
9-1