Operation
9.2 Working with the processing unit
Parameters
Path
Output
Encoding
Output
Byte order
Output
(only if Encoding =
Binary)
Format (only if
Output
Encoding = ASCII)
Position
Output
Sub-ROIs
Output
9-8
Possible Values
Default
Binary
•
Binary
ASCII
•
S7
•
S7
Intel
•
CSV
CSV
•
Fix
•
Absolute
•
Absolute
Trained
•
0 ... 16
16
Meaning
The results for the main ROI and sub-
ROI are sent as binary data or ASCII
strings through the output interface set
in Integrate>Output
Specifies the byte sequence for data
types greater than 8 bits.
S7 format:
Big endian (for a data type greater than
8 bits, the low byte is at the most
significant byte position.)
Intel format:
Little endian (for a data type greater than
8 bits, the low byte is at the least
significant byte position.)
This is where you enter the format for
your output data.
CSV: Send in CSV format
•
Fix: Send individual results with a
•
fixed length of 12 characters
This is where you specify the reference
point.
Absolute:
The position of all ROIs are output as
absolute in relation to the image center
Trained::
The position of the main ROI is output
relative to its position at training based
on the image center.
The position of the sub-ROI is output
relative to its position at training based
on the center of the main ROI.
Note:
This parameter only relates to the
results to be transferred and not to the
displayed results from the screen and
applets.
This is where you enter the number of
sub-ROIs that you wish to transfer.
Vision Sensor SIMATIC VS120
Operating Instructions, Edition 02/2006, A5E00757507-01