Siemens SIMATIC VS120 Operating Instructions Manual page 51

How to mount the sensor head
A mounting plate is supplied with the sensor head.
1. Insert the mounting plate in one of the grooves of the sensor head
2. Secure the sensor to your holder with a mounting plate
How to mount the LED ring flash beside the sensor head
No ring light flash is supplied to secure the LED ring flash beside the sensor head For
ordering information on a suitable ring flash holder, refer to the section
operating instructions.
1. Mount the sensor head on your holder
2. Secure the LED ring flash to the ring flash holder
3. Secure the ring light holder to your holder
• LED ring flash beside the sensor head, at an angle to the optical axis of the sensor head
Figure 6-2
Vision Sensor SIMATIC VS120
Operating Instructions, Edition 02/2006, A5E00757507-01
Notice
LED ring flash beside the sensor head
If the object causes interfering reflections when the LED ring flash is mounted on the
sensor head, mount the LED ring flash beside the sensor head.
Components with ring light
6.2 Installing the sensor head with LED ring flash
Installation
Accessories
in the
6-3