Table of Contents
Advertisement
Operation
9.2 Working with the processing unit
Options parameter menu
Parameters
Path
Light
Type
Light
Parameters
Path
Diagnostics
Buffer
Diagnose>
Logging>
Images
Reasons
Diagnose>
Logging>
Images
Record
Diagnose>
Logging>
Images
Save Next
Diagnose>
Logging>
Images
Buffer
Diagnose>
Logging>
Report
Save Next
Diagnose>
Logging>
Report>
Permanent
Entries
Diagnose>
Logging>
Report>
Permanent
9-16
Possible Values
Default
IR
•
Red
Red
•
Other
•
Possible Values
Default
Ring
•
Ring
Stack
•
Trigger
•
N_OK
N_OK
•
OK
•
WARN
•
Train
•
Image
•
Image
+/- 1 Image:
•
On
Off
•
Off
•
Ring
•
Ring
Stack
•
On
•
Off
Off
•
10 to 2000
2000
Meaning
Here, you enter the type of illumination
being used.
Meaning
Type of image buffer:·
•
Ring: When the buffer contains 6
•
entries, entries 1,2 ... are overwritten.
Stack: When the buffer contains 6
•
entries, no further entries are made.
This is where you specify what causes
an image to be saved.
Image: If one or more of the causes
•
listed above occurs, the current
image is saved.
+/- 1 Image: Not only the current
•
image but also the previous and next
image are saved.
On: The image belonging to the next
•
NOK event is saved permanently in
the EEPROM.
Ring: When the diagnostic buffer
•
contains 5000 entries, entries 1,2 ...
are overwritten.
Stack: When the diagnostic buffer
•
contains 5000 entries, no further
entries are made.
As soon as the function is enabled, as
many diagnostic entries as you specify
in "Entries" are saved in the EEPROM.
Existing entries are deleted when you
switch over to On. If the diagnostic
buffer in the EEPROM reaches the
number of permanently storable
diagnostic data records, no further
entries are made.
Note: Deleting takes several seconds.
Number diagnostic data records that can
be stored on the EEPROM
Vision Sensor SIMATIC VS120
Operating Instructions, Edition 02/2006, A5E00757507-01
Advertisement
Table of Contents
