Table of Contents
Advertisement
Operation
9.3 Working with setup support
Firmware
The "Firmware update" button opens a Web page where you can update the firmware.
Note
If you control the SIMATIC VS120 from an automation system, make sure that the DISA bit
is not set during the firmware update. This prevents a programmable controller from
changing the VS120 processing unit to RUN.
Figure 9-32
9-50
Updating the firmware of the SIMATIC VS120
Vision Sensor SIMATIC VS120
Operating Instructions, Edition 02/2006, A5E00757507-01
Advertisement
Table of Contents
