Setting The Mailbox Password (For Mailbox 2 And 3); Set Answering - Panasonic KX-TG2740S Operating Instructions Manual

Setting the Mailbox Password
You can use Mailbox 2 or 3 for your personal mailbox, and prevent unauthorized
people from accessing the mailbox and listening to the messages. Assign 2-digit
password (00–99) to Mailbox 2 or 3. Each password and the remote code (p. 95)
must be unique. Once the password is assigned to Mailbox 2 or 3, no one can
access the mailbox to listen to messages without entering the password.
Use the base unit. Make sure the base unit is not being used.
1 Press
(FUNCTION)
setting" by pressing
.
á
Scroll to "Set answering" by pressing
2
or , and press
Ñ
Scroll to "Set mailbox2&3 " by pressing
3
or .
Ö Ñ
4 Press .
á
5 Select the mailbox by pressing
(Mailbox 2) or
•If the password has already been assigned to
the mailbox, it is displayed.
Enter a password using a 2-digit number
6
(00–99)
.
•If you entered a wrong number, press (ERASE)
and enter the password again.
Press (Save).
7
á
•A beep sounds.
•If 3 beeps sound, you entered the same password as the other mailbox or
the remote code (p. 95) or the entered password was one-digit. Start again
from step 6 and select another password.
•To exit the programming mode, press (STOP/EXIT).
To check the password: Repeat steps 1 to 5.
•The password is displayed. When finished, press (STOP/EXIT) .
To erase the password
Press in step 6, and press the
(ERASE)
•You will be able to access the mailbox without entering the password.
For assistance, please call: 1-800-211-PANA(7262)
, and scroll to "Initial
or
Ö Ñ
.
á
Ñ
(Mailbox 3).
Ö
(for Mailbox 2 and 3)
Copy directory
H
Initial setting
, and press
---------------
Ö
Set tel line
H

Set answering

---------------
Remote code
H
Set mailbox2&3
Call monitoring
Set password
Set password
Mailbox2
Set password
Mailbox2
(Save).
á
F =Mailbox2
G =Mailbox3
:--
H =Save
:22
H =Save
83