Erasing Messages - Panasonic KX-TG2740S Operating Instructions Manual

Erasing Messages

The unit will announce the remaining recording time after playback, if it is
less than 5 minutes. New messages cannot be recorded when:
—"Memory full" is heard.
—"
ALL MAILBOX FULL
—the ANSWER ON indicator flashes rapidly (only when the Answering
System is on).
Erase some, or all, of the messages. We recommend you erase
unnecessary messages after each playback.
Erasing a specific message
Press
(ERASE)
(p. 86).
•A short beep will sound and the message will be erased.
•The unit will continue to play the next message.
Erasing all messages in the mailbox
All of the recorded messages in the desired mailbox can be erased at one
time.
Press
1
(ERASE)
being used.
•"To erase all messages, please select Mailbox" is
heard.
Within 5 seconds, press the MAILBOX
2
button (
(MAILBOX!1)
(MAILBOX!3)
•If the Mailbox 2 or 3 has the password, enter it
(p. 83).
•A long beep sounds and "Mailbox (No.)" and "No
messages" are heard.
88
" is displayed on the base unit.
while the message you want to erase is being played
while the base unit is not
,
(MAILBOX!2)
).
Select MAILBOX
to erase all
messages
Ex. Mailbox 3 is selected.
or
Mailbox3
PRIVACY
All erase
STOP=End
1 2 3
MAILBOX