Setting The Mailbox Password (For Mailbox 2 And 3); Initial Setting; Set Answering - Panasonic KX-TG2730S Operating Instructions Manual

Setting the Mailbox Password
You can use Mailbox 2 or 3 for your personal mailbox, and prevent unauthorized
people from accessing the mailbox and listening to the messages. Assign 2-digit
password (00–99) to Mailbox 2 or 3. Each password and the remote code (p. 75)
must be unique. Once the password is assigned to Mailbox 2 or 3, no one can
access the mailbox to listen to messages without entering the password.
Make sure the base unit and the handset are not being used.
1 Press
(CONF/FUNCTION)
"Initial setting" by pressing
, and press
Ñ
Scroll to "Set answering" by pressing
2
or , and press
Ñ
Scroll to "Set mailbox2&3 " by pressing
3
or .
Ö Ñ
4 Press .
á
5 Select the mailbox by pressing
(Mailbox 2) or
•If the password has already been assigned to
the mailbox, it is displayed.
Enter a password using a 2-digit number
6
(00–99)
.
•If you entered a wrong number, press
(HOLD/CLEAR) and enter the password again.
Press the right soft key (
7
•A beep sounds.
•If 3 beeps sound, you entered the same password as the other mailbox or
the remote code (p. 75) or the entered password was one-digit. Start again
from step 6 and select another password.
•To exit the programming mode, press (OFF).
To check the password: Repeat steps 1 to 5.
•The password is displayed. When finished, press (OFF) .
To erase the password
Press
(HOLD/CLEAR)
•You will be able to access the mailbox without entering the password.
For assistance, please call: 1-800-211-PANA(7262)
, and scroll to
.
á
.
á
Ñ
(Mailbox 3).
Ö
).
SAVE
in step 6, and press the right soft key (
(for Mailbox 2 and 3)
Copy directory
H

Initial setting

or
Ö
2Way radio mode
Ö
Set tel line
H

Set answering

Set base unit
Remote code
H
Set mailbox2&3
---------------
Set password
Set password
Mailbox2
Set password
Mailbox2
F =Mailbox2
G =Mailbox3
:--
S A V E
:22
S A V E
).
SAVE
65