Remote Code - Panasonic KX-TG2740S Operating Instructions Manual

Remote Code

The remote code prevents unauthorized people from accessing your unit
and listening to your messages. Choose any 2-digit number (00–99).
The factory preset remote code is "11". If you do not program your own
remote code, you can use "11".
Use the base unit. Make sure the base unit is not being used.
1 Press
(FUNCTION)
2 Scroll to "Initial setting" by pressing
or , and press
Ö Ñ
3 Scroll to "Set answering" by pressing
or , press
Ñ
Scroll to "Remote code" by pressing
4
.
Ñ
Press .
5
á
•The current setting is displayed.
6 Enter a remote code using a 2-digit
number (00–99).
Press (Save).
7
á
•A beep sounds.
•If 3 beeps sound, the entered remote code is
the same as the password (p. 83). Start again
from step 6 and select another code.
•To exit the programming mode, press
(STOP/EXIT).
•You can exit the programming mode any time by pressing (STOP/EXIT)
To check the remote code
Repeat steps 1 to 5.
•The remote code is displayed. When finished, press (STOP/EXIT).
For assistance, please call: 1-800-211-PANA(7262)
.
á
.
á
Copy directory
H
Initial setting
---------------
Ö
Set tel line
H
Set answering
---------------
or
Ö
Recording time
H
Remote code
Set mailbox2&3
Remote code
Remote code
:11
H =Save
:35
H =Save
.
95