Remote Operation With The Handset - Panasonic KX-TG2740S Operating Instructions Manual

Remote Operation with the Handset

You can access the mailboxes from
your handset and listen to
messages. If "
PLAY
handset, there are new messages in
the mailboxes. Concerning new
message indications on the base
unit, see page 86.
To listen to messages
1 Press the right soft key (
•A beep sounds and "Please select Mailbox" will
be heard from the speaker. To switch to the
receiver, press
speaker, press
•The mailboxes that have new messages will
flash.
2 Press
(#)(1)
or (Mailbox 3).
(#)(3)
•If "Enter Mailbox password" is announced and
displayed, Mailbox 2 or 3 has the password.
Enter the password (p. 83).
•"Mailbox (No.)" and the number of new
messages will be announced, and new messages will be played.
•To play all messages in the mailbox, press (5).
•You can enter the desired direct commands for other functions (p. 93).
•If you do not enter a command, the voice menu will start (p. 92).
3 To end remote operation, press
•To adjust the speaker or receiver volume, press Ñ to increase and press Ö to
decrease.
•If you do not select a mailbox in step 2, the number of new messages in Mailbox
1 will be announced, and new messages will be played.
For assistance, please call: 1-800-211-PANA(7262)
" flashes on the
PLAY
. To switch back to the
.
(Mailbox 1),
(#)(2)
LINE1 LINE1
).
(Mailbox 2)
.
(OFF)
LINE2 LINE2 PLAY
Soft Key
(
PLAY
(OFF)
Ex. New messages exist.
SP PRIVACY
Received callss
LINE1 LINE2 P L A Y
Ex. Mailbox 1 has new
messages.
Remote operation
#,1=Mailbox1
#,2=Mailbox2
#,3=Mailbox3
)
[ ]
1
G
91