With The Base Unit; With The Handset - Panasonic KX-TG2740S Operating Instructions Manual

With the base unit

Make sure the base unit is not being used.
1 Press
(FUNCTION)
2 Scroll to "Initial setting" by pressing
or and press
Ö Ñ,
Scroll to "Set tel line" by pressing
3
or , and press
Ñ
Scroll to "Set flash time" by pressing
4
or , and press
Ñ
5 Press (Line 1) or
Ö
the line.
•The line's current setting will be displayed.
Select the desired time by pressing
6
.
Ñ
Press (Save).
7
á
•A beep sounds.
•To program the other line, start again from step 4.
•To exit the programming mode, press (STOP/EXIT).
•You can exit the programming mode any time by pressing (STOP/EXIT)

With the handset

Make sure the base unit and the handset are not being used.
Press
(CONF/FUNCTION)
of the base unit, using the handset. The display
will then show the following.
Select the desired time by pressing
and press the right soft key (
•You can exit the programming mode any time by
.
pressing (OFF)
For assistance, please call: 1-800-211-PANA(7262)
.
.
á
.
á
.
á
(Line 2) to select
Ñ
, and follow steps 2 to 5
Ö
).
SAVE
Copy directory
H
Initial setting
---------------
Caller ID edit
Ö
H
Set tel line
Set answering
Set dial mode
Ö
H
Set flash time
Set line mode
Set flash time
G
=Line1
or
Ö
Set flash time
Line1
GF
Set flash time
Line1
GF
LINE1 LINE2
or ,
Ñ
F
=Line2
:700ms
H =Save
.
:700ms
S A V E
79