Troubleshooting - Panasonic KX-TG2740S Operating Instructions Manual

Troubleshooting

Cordless Telephone
Problem
"No link to base.
Walk closer to
base and try
again." is displayed and
an alarm tone sounds.
Static, sound cuts in/out,
fades. Interference from
other electrical units.
The handset and/or the
base unit does not ring.
The line status icons do not
display properly and/or the line
indicators do not light properly.
The handset display is blank.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the unit starts to
ring and stops the
program/search.
You cannot make an internal/
external call with the handset.
For assistance, please call: 1-800-211-PANA(7262)
Cause & Remedy
•You are too far from the base unit.
Walk closer to the base unit and try again.
•Plug in the AC adaptor.
•Raise the base unit antennas.
•Locate the handset and the base unit away
from other electrical appliances (p. 3).
•Walk closer to the base unit.
•Raise the base unit antennas.
•Press
on the handset to turn on the
Ü
Reception Booster feature (p. 34).
•The ringer volume is OFF. Set to HIGH or
MEDIUM or LOW (p. 24, 25, 75).
•If more than one other user is using the
handsets and base unit, the handset/base
unit may not ring. Those users will hear
incoming call tones (p. 81) and the LINE
indicator flashes quickly on the base unit.
•Check the settings (p. 11–14).
•The line mode selection is incorrect. See
page 22.
•Charge the battery fully (p. 14).
•You cannot store an item with the handset
while the handset is in the talk, speakerphone,
intercom or Room Monitor mode, 2-Way Radio
mode or in the remote operation mode.
•You cannot store an item with the base unit
while the base unit is in the speakerphone,
intercom or Room Monitor mode or while
listening to messages.
•Do not pause for over 60 seconds while storing.
•To answer the call, press
relevant soft key (
handset or
(DIGITAL!SP-PHONE)
called line button on the base unit. Start
again from the beginning after hanging up.
•If the 2-Way Radio mode is on, turn it off
(p. 74).
or
or ) on the
LINE1 LINE2
or the
or the
109