Line Selection - Panasonic KX-TG2740S Operating Instructions Manual

Special Features

Line Selection

The handset and base unit will automatically select a free line when you make a call by
pressing or
will also select the in-coming called line when you answer the in-coming call. You can
change the line selection of the handset and base unit. There are three options as following:
Line 1: Line 1 will be selected.
Auto (factory preset): A free line will be selected (Line 1 has priority) when making a call by
pressing or
when you call back using Caller ID information (p. 42, 87), the line that is indicated will be
selected. You can also select any line by pressing one of line soft keys (
the handset or a line button on the base unit. When a call is being received, the called line is
selected when you press
Handset
Make sure the handset is not being used.
Press
1
(CONF/FUNCTION),
or
Ö Ñ
2 Scroll to "Set tel line" by pressing
or , and press
Ñ
3 Press
á
•The current setting will be displayed.
4 Select the desired line selection, "Line1",
"Line2" or "Auto", by pressing
Press the right soft key (
5
•A beep sounds.
•To exit the programming mode, press (OFF).
Base unit
Make sure the base unit is not being used.
1 Press
(FUNCTION)
or
Ö Ñ
Scroll to "Set tel line" by pressing
2
or , and press
Ñ
Press
3
á
•The current setting will be displayed.
Select the desired line selection, "Line1",
4
"Line2" or "Auto", by pressing
and press
•A beep sounds.
•To exit the programming mode, press (STOP/EXIT).
80
on the handset or
on the handset or (DIGITAL!SP-PHONE) on the base unit. However,
or
, and press .
á
.
á
at "Line selection".
, and scroll to "Initial setting" by pressing
, and press .
á
.
á
at "Line selection".
(Save)
á .
(DIGITAL!SP-PHONE)
Line 2: Line 2 will be selected.
or (DIGITAL!SP-PHONE) to answer the in-coming call.
scroll to "Initial setting" by pressing
Ö
or
Ö Ñ
).
SAVE
Ö
or
Ö Ñ
on the base unit. The unit
LINE1
Caller ID edit
H
Set tel line
Registration
---------------
H
Line selection
Set dial mode
Line selection
Incomin
.
GF
LINE1 LINE2
Caller ID edit
H
Set tel line
Set answering
---------------
H
Line selection
Set dial mode
Line selection
Incomin
,
GF
or ) on
LINE2
:Auto
S A V E
:Auto
H =Save