Base Unit (Digital Duplex Speakerphone) - Panasonic KX-TG2740S Operating Instructions Manual

Making Calls
Base Unit
1 Press
(DIGITAL!SP-PHONE)
•The DIGITAL SP-PHONE indicator lights.
•A free line is automatically selected and the line
indicator lights. (To change the line selection,
see page 80.)
Dial a phone number.
2
•After a few seconds, the display will show the
length of the call.
When the other party answers, talk into the
3
MIC (microphone).
4 To hang up, press
•The indicator lights go out.
•In step 1, you can select a line by pressing a line button whose indicator does not
light, instead of pressing (DIGITAL!SP-PHONE).
•To switch to the handset while using the base unit speakerphone:
– If the handset is off the base unit, press the left soft key (
key (
LINE2
– If on the base unit, just lift up.
•The line indicators show the line status (p. 38).
•To use the Privacy feature and (MUTE) feature, see pages 71 and 76.
Hands-free Digital Duplex Speakerphone
For best performance, please note the following:
•Talk alternately with the caller in a quiet room.
•If the other party has difficulty hearing you, press Ö to decrease the speaker volume.
•If the other party's voice from the speaker cuts in/out during a conversation,
press Ö to decrease the speaker volume.
36
(Digital Duplex Speakerphone)
,
(DIGITAL!SP-PHONE)
) for the line, then press (DIGITAL!SP-PHONE) on the base unit.
Line buttons and Indicators
(HOLD)
MIC
(DIGITAL!SP-PHONE) and Indicator
.
.
(REDIAL/PAUSE)
SP-phone
I =Privacy
SP-phone
1112222
SP-phone
00-00-00
I =Privacy
Off
00-01-00
LINE1 ) or the middle soft
Line1
Line1
Line1