If The Following Appear - Panasonic KX-TG2740S Operating Instructions Manual

If the Following Appear...

If the unit detects a problem, one of the following messages will be displayed
on the handset or the base unit. Error beeps or a busy tone will sound.
Display message
Recharge battery
(handset only)
Charge for 15HRS
(handset only)
No link to base.
Walk closer to
base and try
again.
(handset only)
Busy
Invalid
Error!!
Directory
DirectFull
106
Cause & Remedy
The battery needs to be charged. Recharge the
battery (p. 15).
The battery has been discharged. The handset
will not work. Charge the battery fully (p. 15).
The handset has lost communication with the
base unit. Walk closer to the base unit, and try
again.
• The called handset/base unit is in use.
• Both lines are in use. Wait until one of the line
indicators or the line status icons goes out.
• The Privacy mode is on for the call you tried to
join (p. 71).
• The unit you tried to send directory items to is in
use.
• The handset you are calling is too far from the
base unit.
• The called handset has not been registered to the
base unit or you selected your extension number.
• You pressed
(9)
extension number. Enter the extension number
( to ) to call.
(0) (8)
• When you tried to register or deregister the
handset, the handset and the base unit could
not link for some reason, such as interference
from other electrical appliances. Take the
handset and the base unit away from the
electrical appliances and try again.
• If more than one handset is in use, you may not
be able to register/deregister. Try again later.
• Another unit tries to send the directory items to
you but the transfer has been stopped (p. 59).
When trying to store an item in the directory, the
directory memory is full. To erase other items from
the directory, see page 58.
instead of entering an