Panasonic KX-TG2740S Operating Instructions Manual page 17

Useful information:
•"---------------" indicates the beginning or end of the function menu.
•You can go back to the previous display by pressing Ü except when entering characters
or numbers. To return to the main menu from the sub-menu I or sub-menu II, press Ü.
•You can exit the programming mode any time by pressing (OFF).
•If you do not press any buttons for 60 seconds, the handset will exit the
programming mode.
•If the unit detects a problem, an error message will be displayed (p. 106).
Handset function menu table
You can use the following functions to customize your unit. After pressing
(CONF/FUNCTION)
menu have a sub-menu I. The sub-menu I is shown after selecting the
item in the main menu. If the sub-menu I item has the sub-menu II, it will
be displayed after selecting that sub-menu I item. See the corresponding
pages for function details.
Main menu
Save directory
Ringer setting
Copy directory
Initial setting
2Way radio mode
*
"Set dial mode", "Set flash time" and "Set line mode" can be programmed
with either the handset or base unit. You do not need to program those items both on
the handset and base unit.
For assistance, please call: 1-800-211-PANA(7262)
, the main menu is displayed. Most items in the main
Sub-menu I
p. 51
Ringer volume
Ringer tone
Incoming call
Copy 1 item
Copy all items
LCD contrast
Auto talk
Room monitor
Caller ID edit
Set tel line
Registration
p. 74
Sub-menu II
p. 24
p. 77
p. 81
p. 59
p. 61
p. 26
p. 23
p. 72
p. 45
Line selection
Set dial mode
Set flash time
Set line mode
HS registration
Deregistration
p. 80
p. 21*
p. 79*
p. 22*
p. 105
p. 104
17